MIL-I-60513 Initiator, Cartridge Actuated, Delay M45A1 AssemblyThis specification covers the requirements for the M45A1 Delay Cartridge Actuated Initiator Assembly.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

MIL-I-60513A

3.8.2  Misfires.  There shall be no misfires.

3.8.3   Mechanical failures.  The initiator shall function without mechanical failure (see

6.4.2).

TABLE I.  Pressure values.

3.9   Workmanship.  Initiators shall be free of cracks, splits, or other defects which might prevent proper mating with connecting parts or proper functioning of the device.

3.9.1    Metal  defects.    All  components  shall  be  free  from  cracks,  splits,  cold  shuts, inclusions, porosity, or any similar defect.

3.9.2  Burr.  No part shall have a burr which might interfere with the assembly or function of the item or which might be injurious to personnel handling the item.

3.9.3  Foreign matter.  No part or assembly shall contain chips, dirt, grease, rust, corrosion, or other foreign matter.

4.  QUALITY ASSURANCE PROVISIONS

4.1  Responsibility for inspection.  Unless otherwise specified in the contract or purchase order,  the  contractor  is  responsible  for  the  performance  of  all  inspection  requirements (examinations and tests) as specified herein.  Except as otherwise specified in the contract or purchase  order,  the  contractor  may  use  his  own  or  any  other  facilities  suitable  for  the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in this specificationwheresuchinspectionsaredeemednecessarytoensuresuppliesandservicesconform to prescribed requirements (see 6.2).

4.1.1  Responsibility for compliance.  All items shall meet all requirements of sections 3 and

5. The inspection set forth in this specification shall become a part of the contractor's overall inspection system or quality program.  The absence of any inspection requirements in the

4