MIL-DTL-60286C
4.2.1.2 Size of lot. The production lot size shall be as specified in the contract (see 6.2).
4.2.2 Examination. One hundred percent examination shall be performed for all critical defects.
Examination for major and minor defects shall be performed in accordance with the classification of
defects. Four power (4x) magnification may be used for inspection of such defects as burr and foreign
matter. When compliance with the applicable requirement is in doubt as a result of visual examination,
the characteristic shall be measured or gaged to determine acceptability. All nonconforming material
shall be rejected.
4.2.2.1 Cartridge, Drawing 8597230, covering a detail of Drawing 10520619.
Characteristics
Defect
Method of Inspection
Critical
1
Mixed cartridges
Visual
2
Metal defective
Visual
Major
101
Foreign matter present
Visual
Minor
201
Case scratched, wrinkled, bulged, or dented
Visual
202
Varnish missing or inadequate
Visual
4.2.2.2 Assembly, Drawing 10520619, less all drawings except Drawings 10520473, 10520474,
10520622, 10520496, and MS29513-9.
Characteristics
Defect
Method of Inspection
Critical
1
Firing pin protrusion
Gage
2
Shear pin not engaged in firing pin
Gage
3
Striker hole in initiator cap obstructed
Visual
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business