MIL-T-46583C
128 |
Diameter of chamfer, thread |
Gage |
129 |
Width of undercut, small external thread, max |
Gage |
130 |
Width of undercut, large external thread, max |
Gage |
131 |
Angle at mouth of thread cavity |
Gage |
132 |
Radius at root of boss |
Visual |
133 |
Thread damaged or not full |
Visual |
134 |
Metal defective |
Visual |
135 |
Protective finish inadequate or defective |
Visual |
136 |
Pellet missing, loose, or improperly inserted |
Manual/Visual |
137 |
Surface finish of internal thread and mouth chamfer improper |
Visual |
138 |
Burr or sharp corner |
Visual |
139 |
Foreign matter |
Visual |
Minor 201 |
Pitch diameter large external thread, max |
Gage |
202 |
Pitch diameter of small external thread, max |
Gage |
203 |
Pitch diameter of internal thread, min |
Gage |
204 |
Pitch diameter of pin hole thread, min |
Gage |
205 |
Diameter of cavity, min |
Gage |
206 |
Diameter of boss cavity |
Gage |
207 |
Diameter of pin hole, min |
Gage |
208 |
Diameter of body |
Gage |
209 |
Diameter of striker hole |
Gage |
210 |
Diameter of counterbore |
Gage |
211 |
Depth of striker hole |
Gage |
212 |
Total length |
Gage |
213 |
Length from bottom of cavity to face of boss |
Gage |
214 |
Length from large body diameter to shoulder |
Gage |
215 |
Location of pin hole |
Gage |
216 |
Location of pellets, large thread |
Gage |
217 |
Location of pellets, small thread |
Gage |
218 |
Diameter of body, large end |
Gage |
219 |
Diameter of undercut, large external thread, min |
Gage |
220 |
Diameter of undercut, small external thread, min |
Gage |
221 |
Diameter of undercut at large body end, min |
Gage |
222 |
Diameter of wrench holes |
Gage |
223 |
Depth of wrench holes |
Gage |
224 |
Length from shoulder to face of boss |
Gage |
225 |
Length of undercut and large external thread |
Gage |
226 |
Location of wrench holes |
Gage |
227 |
Marking missing, incorrect, or illegible |
Visual |
228 |
Radius or chamfer incorrect, except as otherwise classified |
Gage |
229 |
Surface finish improper, except as otherwise classified |
Visual |
4.5.2.3 |
Sleeve, End, Drawing 8594497, covering a detail of Drawing 10522631. |
Critical
None defined
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business