MIL-T-46583C
characteristic shall be measured or gaged to determine acceptability. All nonconforming material shall be rejected.
4.5.2.1 Rod, Piston, Drawing 8594494, covering a detail of Drawing 10522631.
Characteristics Defect Method of Inspection
Critical None defined |
||
Major 101 |
Concentricity of ring groove with large body diameter |
Gage |
102 |
Concentricity of body midsection with large body diameter |
Gage |
103 |
Concentricity of cavity with pilot diameter |
Gage |
104 |
Concentricity of key locking groove with pilot diameter |
Gage |
105 |
Concentricity of key escape groove with pilot diameter |
Gage |
106 |
Concentricity of pilot with large body diameter |
Gage |
107 |
Concentricity of body at rear of ring groove with large body diameter |
Gage |
108 |
Diameter of ring groove |
Gage |
109 |
Diameter of large body, min |
Gage |
110 |
Diameter of body of ring groove |
Gage |
111 |
Diameter of body midsection |
Gage |
112 |
Diameter of key escape groove, max |
Gage |
113 |
Diameter of key locking groove, min |
Gage |
114 |
Diameter of pilot, min |
Gage |
115 |
Diameter of cavity |
Gage |
116 |
Depth of cavity, max |
Gage |
117 |
Length from face, pilot end, to end of key escape groove |
Gage |
118 |
Length from face, pilot end, to start of key escape groove |
Gage |
119 |
Length from face, pilot end, to angle between body and midsection, min |
Gage |
120 |
Location of key groove |
Gage |
121 |
Profile of key groove |
Gage |
122 |
Profile of ring groove |
Gage |
123 |
Metal defective |
Visual |
124 |
Protective finish inadequate or defective |
Visual |
125 |
Surface finish of pilot, key locking groove, and large body improper |
Visual |
126 |
Burr or sharp corner |
Visual |
127 |
Foreign matter |
Visual |
Minor 201 |
Diameter of large body, max |
Gage |
202 |
Diameter of key escape groove, min |
Gage |
203 |
Diameter of key locking groove, max |
Gage |
204 |
Diameter of pilot, max |
Gage |
205 |
Depth of cavity, min |
Gage |
206 |
Length of pilot |
Gage |
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business