INCH-POUND
MIL-DTL-82929A(OS)
13 September 2000
SUPERSEDING
MIL-I-82929(OS)
18 August 1994
DETAIL SPECIFICATION
INITIATOR, EXPLOSIVE ACTUATED, JAU-24/A
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by
all Departments and Agencies of the Department of Defense.
1. Scope.
1.1 Scope. This specification covers the requirements for the manufacture and acceptance of the
JAU-24/A Explosive Actuated Initiator, referred to herein as "initiator".
2. Applicable Documents.
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents
specified in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-P-20444
Primer, Percussion, M42 Parts for and Loading, Assembling and Packing
MIL-D-21625
Design and Evaluation of Cartridges for Cartridge Actuated Devices
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this
document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center, Standardization Team
(Code 840M), 101 Strauss Avenue, Indian Head, MD 20640-5035 by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document, or by sending a letter.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business