INCH-POUND
MIL-DTL-60515C
25 February 2005
SUPERSEDING
MIL-I-60515B
17 March 1992
DETAIL SPECIFICATION
INITIATOR, CARTRIDGE ACTUATED, DELAY,
M30A1, M32A1, M43A1, M92, AND M120 METAL PARTS ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M30A1, M32A1, M43A1, M92, and
M120 Cartridge Actuated Initiator Metal Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4 or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks . The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS AND STANDARDS
MIL-A-2550
Ammunition, General Specification For
MIL-STD-1168
Ammunition Lot Numbering and Ammunition Data Card
MIL-STD-413
Visual Inspection Guide for Elastomeric O-rings
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division,
Naval Surface Warfare Center, Technical Information Branch (Code 4230), 101 Strauss Avenue, I dian Head,
n
Maryland 20640-5035, or emailed to amanda.penn@navy.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business