MIL-DTL-60201D
(Copies of this document are available online at https://e-standards.asq.org/ or from the American Society
for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM E 1742
Inspection, Radiographic
(Copies of these documents are available online at www.astm.org or from the American Society for
Testing and Materials Customer Service, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.2 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Materials. All materials used in the manufacture of the thrusters shall conform to the specifications
referred to on the respective drawings unless specific approval in writing covering a departure therefrom has
been obtained from the cognizant Navy design activity prior to manufacture. When alternate materials or
methods of manufacture are specified on the drawings, the bidder's selections shall be clearly stated in the
proposal.
3.2 Components.
3.2.1 Primary components. For the purpose of this specification, the M127 impulse cartridge
(Drawing 10520589) is defined as a primary component. Only primary components from a single lot shall
be used in a production lot of thrusters; however, one primary component production lot may be used in
more than one thruster production lot.
3.2.2 Component parts. All component parts shall meet the applicable requirements of MIL-T-50713
or MIL-T-60561 prior to assembly.
3.3 Torque. Torque requirements shall be as specified in table I. No movement shall occur upon
application of the breakaway torque.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business