MIL-DTL-50713B
3.8.2 Burr. No part shall have a burr which might interfere with the assembly or function of the item or
which might be injurious to personnel handling the item.
3.8.3 Foreign matter. No part or assembly shall contain chips, dirt, grease, rust, corrosion, or other
foreign matter.
4. VERIFICATION
4.1 Classification of inspections.
a. Quality conformance inspection
4.1.1 Quality assurance terms and definitions. Reference shall be made to ANSI/ISO/ASQ A8402 to
define the quality assurance terms used.
4.1.2 Inspections. Inspections shall be in accordance with MIL-A-2550.
4.2 Inspection conditions. Unless otherwise specified (see 6.2), all inspections shall be performed
under the following conditions:
a.Temperature: room ambient (68 to 77F)
b.Altitude: sea level
c.Humidity: 50 percent relative, maximum
d.Atmospheric pressure: 14.7 psi
4.3 Quality conformance inspection.
4.3.1 Lot.
4.3.1.1 Submission of product. Unless otherwise specified by the contracting activity, formation and
identification of lots shall be in accordance with ANSI/ASQ Z1.4.
4.3.1.2 Size of lot. For the purpose of identification and shipment, the shipping lots of metal parts
assemblies shall consist of 1200 assemblies, maximum, provided the homogeneity requirements of
inspection lots have been retained.
4.3.2 Examination. On reprocessed parts, one hundred percent examination shall be performed for all
critical defects. Examination for major and minor defects shall be performed on a defect basis in accordance
with the classification of defects. Four power (4x) magnification may be used in performing visual
examination for such defects as burr and foreign matter. Inspection for rubber O-rings shall be in
accordance with MIL-STD-413. When compliance with the applicable requirement is in doubt as a result of
visual examination, the characteristic shall be measured or gaged to determine acceptability. All
nonconforming material shall be rejected.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business