MIL-DTL-50648B
4.6.6 Ammunition Container, Metal M21 for Delay Element M5 or M8, Drawing 8826728.
Characteristic
Defect
Method of Inspection
Critical
None defined
Major
None defined
Minor
201
Contents loose
Manual/Visual
202
Separator or filler missing
Visual
203
Sealing inadequate, incompetent, or incorrect
Visual
204
Container cut or damaged
Visual
205
Marking missing, incorrect, or illegible
Visual
4.6.7 Box, Packing Ammunition for Delay Element M5 or M8 in Metal Container, M21, Drawing
8826729.
Characteristic
Defect
Method of Inspection
Critical
None defined
Major
None defined
Minor
201
Contents loose
Manual/Visual
202
Hardware missing, loose, broken, or improperly engaged
Visual
203
Strapping missing, loose, broken, or improperly assembled
Visual
204
Contents of box exposed
Visual
205
Box damaged
Visual
206
Marking missing, incorrect, or illegible
Visual
207
Number of cartons incorrect
Visual
4.7 Test methods and procedures.
4.7.1 Ignition device x-ray. Prior to assembly into the cartridge, the ignition device shall be
radiographically examined in accordance with ASTM E1742. Each ignition device shall be x-rayed on
boards or trays with the cup side perpendicular to the rays. The x-ray negatives shall be identified by
item nomenclature and by lot number. Ignition devices are to be left mounted to the boards or trays until
after the x-rays have been reviewed and defects identified to facilitate removal of defective units. After
screening, the x-ray negatives with defectives identified shall be forwarded to the engineering activity
designated by the procuring activity (see 6.2). Interpretation of the radiographic films shall verify the
following: missing or abnormally thin charge; charge broken, cracked, or porous; cracked or off-center
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business