INCH-POUND
MIL-T-60696A(OS)
11 August 1994
SUPERSEDING
MIL-T-60696(MU)
14 February 1969
MILITARY SPECIFICATION
THRUSTER, CARTRIDGE ACTUATED, M2A2
REMANUFACTURED METAL PARTS ASSEMBLY
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for
use by all Departments and Agencies of the Departments of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M2A2 Cartridge Actuated Thruster
Remanufactured Metal Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and
supplements thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
MILITARY
MIL-A-2550
Ammunition, General Specification For
STANDARDS
MILITARY
MIL-STD-105
Sampling Procedures And Tables For Inspection By Attributes
MIL-STD-109
Quality Assurance Terms And Definitions
MIL-STD-413
Visual Inspection Guide for Elastomeric O-rings
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this
document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center, Standardization
Branch (Code 8420), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by sending a letter.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business