MIL-T-46605 Thruster, Cartridge Actuated, M13 Metal Parts AssemblyThis specification covers the requirements for the M13 Cartridge Actuated Thruster Metal Parts Assembly see 6.1.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

4.5.2.17  Box, Fiberboard (Outer), Alternative, Packing, Ammunition, Drawing 9217388.

4.5.3  Inspection testing.  The following tests shall be performed in accordance with 4.6.

4.5.3.1  Hardness.  Fifty units from each heat treated lot of components shall be tested for compliance with the requirements on the applicable drawing.  Failure of any unit to comply with the drawing requirements shall be cause for rejection of the lot of components.

4.5.3.2  Hydrostatic pressure.  Each body shall be subjected to the hydrostatic pressure test.  Failure of any unit to comply with 3.4 shall be cause for rejection of the subassembly.

4.5.3.3  Breakaway torque.  Each piston fastener and piston shall be subjected to a breakaway torque test. Failure to comply with the requirements of column C of table I shall be cause for rejection of the unit.

4.5.3.4   Shear pin strength.  Fifty pins from each lot of shear pins shall be tested for shear strength. Failure of any shear pin to comply with 3.6 shall be cause for rejection of the lot.

4.5.3.5  Protective finish.  The number of units for protective finish tests shall be in accordance with the applicable specification.  Failure of any unit in the inspection sample to comply with the requirements of the applicable specification shall be cause for rejection of the lot.

15