MIL-T-46590C
203 |
Width |
Gage |
204 |
Location of holes |
Gage |
205 |
Thickness |
Gage |
206 |
Inside radius |
Gage |
207 |
Surface finish improper |
Gage |
4.5.2.17 Firing Pin Housing and Pellet Assembly, Drawing 10520880, covering a detail of Drawing
10520876.
Critical None defined |
||
Major 101 |
Pitch diameter of external thread, min |
Gage |
102 |
Major diameter of external thread, min |
Gage |
103 |
Protrusion of pellets |
Gage |
104 |
Pitch diameter of internal thread, max |
Gage |
105 |
Minor diameter of internal thread, max |
Gage |
106 |
Concentricity of long cavity with external thread |
Gage |
107 |
Concentricity of boss with external cavity |
Gage |
108 |
Perpendicularity of boss face with cavity |
Gage |
109 |
True position of pin hole |
Gage |
110 |
Diameter of internal thread pilot |
Gage |
111 |
Diameter of long cavity, max |
Gage |
112 |
Diameter of pin hole, max |
Gage |
113 |
Diameter of boss |
Gage |
114 |
Length of effective internal thread, min |
Gage |
115 |
Length of internal thread, max |
Gage |
116 |
Height of boss |
Gage |
117 |
Thread damaged or not full |
Visual |
118 |
Metal defective |
Visual |
119 |
Protective finish inadequate or defective |
Visual |
120 |
Surface finish in cavity or internal threaded end improper |
Visual |
121 |
Burr or sharp edge |
Visual |
122 |
Foreign matter |
Visual |
123 |
Pellet missing, loose, or improperly inserted |
Manual/Visual |
124 |
Thread damaged |
Visual |
125 |
Burr |
Visual |
126 |
Foreign matter |
Visual |
Minor 201 |
Location of pellets |
Gage |
202 |
Pitch diameter of external thread, max |
Gage |
203 |
Pitch diameter of internal thread, min |
Gage |
204 |
Pitch diameter of setscrew thread |
Gage |
205 |
Minor diameter of setscrew thread |
Gage |
206 |
Diameter of long cavity, min |
Gage |
207 |
Diameter of pin hole, min |
Gage |
16
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business