MIL-I-602848
specificationwheresuchinspectionsaredeemednecessarytoensuresuppliesandservicesconform to prescribed requirements (see 6.2).
4.1.1 Responsibility for compliance. All items shall meet all requirements of sections 3 and
5. The inspection set forth in this specification shall become a part of the contractor's overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Sampling inspection, as part of manufacturing operations, is an acceptable practice toascertainconformancetorequirements;however,thisdoesnot authorize submission of known defectivematerial,eitherindicatedoractual,nordoesitcommittheGovernmenttoacceptance of defective material.
4.1.2 Quality assurance terms and definitions. Reference shall be made to MIL-STD-109 to define the quality assurance terms used.
4.1.3 Inspections. Inspections shall be in accordance with MIL-A-2550 and MIL-STD-453.
4.2 Inspection provisions.
4.2.1 Lot.
4.2.1.1 Submission of product. Unless otherwise specified by the contracting activity, formation, and identification of lots shall be in accordance with MIL-STD-105.
4.2.1.2 Size of lot. The production lot size shall be as specified in the contract (see 6.2).
4.2.2 Examination. 0ne hundred percent examination shall be performed for all critical defects. Examination for major and minor defects shall be performed in accordance with the classification of defects. Four power (4x) magnification may be used for inspection of such defectsasburrandforeignmatter. Whencompliancewiththeapplicablerequirementisindoubt as a result of visual examination, the characteristic shall be measured or gaged to determine acceptability. All nonconforming material shall be rejected.
4.2.2.1 Cartridge, Delay, M93, Drawing 8593312, covering a detail of Drawing 8595409.
Characteristics Defect Method of Inspection
Critical |
||
1 |
Mixed cartridges |
Visual |
2 |
Metal defective |
Visual |
3 |
0-ring missing |
Visual |
Major
1010-ring split, cut, or cracked Visual
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business