INCH-POUND
MIL-DTL-60525B
6 January 2012
SUPERSEDING
MIL-I-60525A
30 March 1990
DETAIL SPECIFICATION
INITIATOR, CARTRIDGE ACTUATED, M99 METAL PARTS ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M99 Cartridge Actuated Initiator
Metal Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-2550
Ammunition, General Specification For
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the
Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia PA
19111- 5094.)
Comments, suggestions, or questions on this document should be addressed to DEPARTMENT OF THE NAVY, Indian
Head Division, NSWC, Code E12AP, Document Control, 4123 Artisans Court, Suite 103, Indian Head, Maryland 20640-
5085, OFFICIAL BUSINESS, or emailed to amanda.penn@navy.mil. Since contact information can change, you may want
to verify the currency of this information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business