MIL-DTL-60283C
Component parts. All component parts shall meet the requirements of MIL-DTL-60517 or
3.10
MIL-DTL-82763.
4. VERIFICATION
Classification of inspections. The inspection requirements specified herein are classified as
4.1
follows:
a. Conformation inspection.
4.1.1 Quality assurance terms and definitions. Reference shall be made to ASQ Q9000 to define the
quality assurance terms used.
Inspection. Inspection shall be in accordance with MIL-A-2550 and ASTM E1742/E1742M.
4.1.2
4.2
Inspection provisions.
4.2.1
Lot.
4.2.1.1 Submission of product. Unless otherwise specified by the contracting officer, formation of lots
and presentation of lots shall be in accordance with the "Submission of Product" provision of ASQ Z1.4.
4.2.1.2 Size of lot. A lot shall be of an identifiable group of assembled initiators containing metal parts
assemblies produced by a homogeneous process and loaded with one lot of accepted cartridges.
4.2.2 Examination. One hundred percent examination shall be performed for all critical defects.
Examination for major and minor defects shall be performed on a defect basis in accordance with the
classification of defects. Four power (4X) magnification may be used for inspection of such defects as
burr and foreign matter. When compliance with the applicable requirement is in doubt as a result of
visual examination, the characteristics shall be measured or gaged to determine acceptability. All
nonconforming material shall be rejected
4.2.2.1 Cartridge, Impulse, M91, Drawing 8597230, covering a detail of Drawing 10520550.
Characteristic
Defect
Method of Inspection
Critical
1
Mixed cartridges
Visual
2
Metal defective
Visual
3
Marking missing, incorrect or illegible
Visual
Major
101
Foreign matter present
Visual
Minor
201
Case scratched, wrinkled, bulged, or dented
Visual
202
Varnish missing or inadequate
Visual
4.2.2.2 Assembly, Drawing 10520550, less all Drawings except 10520410, 10520411,
and MS19060-3.
Critical
1
Firing pin protrusion
Gage
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business