MIL-DTL-60283C
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DRAWINGS
NAVAL ORDNANCE STATION, INDIAN HEAD (GAGE CODE 19200 and 19203)
8597230
Cartridge, Impulse, M91 Assembly
DL10520550
Initiator, Cartridge Actuated, M27, Assembly
(Application for copies should be addressed to Commanding Officer, Naval Surface Warfare Center,
Indian Head, Technical Information Branch (Code 4230), Indian Head, MD 20640.)
Non-Government publications. The following documents form a part of this document to the
2.3
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM E1742/E1742M Standard Practice for Radiographic Examination
(Copies of this document are available online at https://www.astm.org/cgi-
bin/SoftCart.exe/STORE/standardsearch.shtml?L+mystore+afpt6301+1062008944 or from the American
Society for Testing and Materials Customer Service, 100 Barr Harbor Drive, West Conshohocken, PA
19428-2959.)
AMERICAN SOCIETY FOR QUALITY
ASQ Q9000
Quality Management Systems Fundamentals and Volcabulary
ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes
(Application for copies should be addressed to the American Society for Quality Control, PO Box 3005,
611 E. Wisconsin Ave., Milwaukee, WI 53201-4606.)
Order of precedence. In the event of a conflict between the text of this document and the
2.4
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
Materials. All materials used in the manufacture of the initiators shall conform strictly to the
3.1
specifications referred to on the respective drawings unless specific approval in writing covering a
departure there from has been obtained from the cognizant Navy design activity prior to manufacture.
When alternate materials or methods of manufacture are specified on the drawings, the bidder's selections
shall be clearly stated in the proposal.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business