INCH-POUND
MIL-DTL-50374B
14 September 2004
SUPERSEDING
MIL-I-50374A
11February 1993
DETAIL SPECIFICATION
INITIATOR, PROPELLANT ACTUATED, M104 ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M104 Propellant Actuated Initiator
Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4 or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-2550
Ammunition, General Specification For
MIL-P-46994
Charge, Propelling, 8-Inch, M1, (Green Bag) Loading, Assembling and Packing
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division, Naval
Surface Warfare Center, Technical Information Branch (Code 4230), 101 Strauss Avenue, Indian Head, Maryland 20640-
5035, or emailed to pennam@ih.navy.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business