INCH-POUND
MIL-DTL-46200C
02 August 2005
SUPERSEDING
MIL-C-46200B
15 January 1992
MILITARY SPECIFICATION
CARTRIDGE, IMPULSE, M42A1 ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M42A1 Impulse Cartridge (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements of documents cited in
sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues
of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-2550
Ammunition, General Specification For
MIL-A-8625
Anodic Coatings, For Aluminum And Aluminum Alloy
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division,
Naval Surface Warfare Center, Technical Information Branch (Code 4230), 101 Strauss Avenue, Indian Head,
Maryland 20640-5035, or emailed to amanda.penn@navy.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business