INCH-POUND
MIL-DTL-14804B(OS)
3 July 1996
SUPERSEDING
MIL-I-14804A
14 March 1994
DETAIL SPECIFICATION
INITIATOR, CARTRIDGE ACTUATED, DELAY M4A1, M12A1, M45A1, and M49A1
REMANUFACTURED METAL PARTS ASSEMBLY
This specification is approved by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M4A1, M12A1, M45A1, and M49A1 Delay
Cartridge Actuated Initiator Remanufactured Metal Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list,
document users are cautioned that they must meet all specified requirements documents specified in sections
3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of Specifications and Standards
(DODISS) and supplements thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
MILITARY
MIL-A-2550
Ammunition, General Specification For
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving
this document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center, Standardization
Branch (Code 8420), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by sending a letter.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business