MIL-DTL-14803B
rejected.
4.4.2.1 Examination of reclaimed parts. Examination of reusable parts, which require no
reprocessing, shall be limited to inspection of defects that require visual type inspection. One hundred
percent examination shall be performed for all such defects. All nonconforming parts shall be reprocessed
or rejected.
4.4.2.2 Retainer, Cartridge, Drawing 8594860, covering a detail of Drawing 10520225.
Characteristics
Defect
Method of Inspection
Critical
1
Metering slots in base missing
Visual
Major
101
Pitch diameter of thread, max
Gage
102
Minor diameter of thread, max
Gage
103
Elongated slots missing
Visual
104
Thread damaged
Visual
105
Metal defective
Visual
106
Protective finish inadequate or defective
Visual
107
Surface finish on internal radius and base improper
Visual
108
Burr
Visual
109
Foreign matter
Visual
Minor
None defined
4.4.2.3 Chamber, Initiator, Drawing 8594857, covering a detail of Drawing 10520225.
Characteristics
Defect
Method of Inspection
Critical
None defined
Major
101
Pitch diameter of large thread, min
Gage
102
Minor diameter of large thread, min
Gage
103
Pitch diameter of small thread, min
Gage
104
Major diameter of small thread, min
Gage
105
Thread damaged
Visual
106
Metal defective
Visual
107
Protective finish inadequate or defective
Visual
108
Surface finish, end of gas port, improper
Visual
109
Burr
Visual
110
Foreign matter
Visual
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business