MIL-DTL-14803B
3.8.1 Metal defects. All components shall be free from cracks, splits, cold shuts, inclusions,
porosity, or any similar defect.
3.8.2 Burr. No part shall have a burr which might interfere with the assembly or function of the
item or which might be injurious to personnel handling the item.
3.8.3 Foreign matter. No part or assembly shall contain chips, dirt, grease, rust, corrosion, or other
foreign matter.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a.
Quality conformance inspection (see 4.4)
4.2 Quality assurance terms and definitions. Reference shall be made to ANSI/ASQ A8402 to
define the quality assurance terms used.
4.3 Inspections. Inspections shall be in accordance with MIL-A-2550.
4.3.1 Inspection conditions. Unless otherwise specified (see 6.2), all inspections shall be
performed under the following conditions:
a. Temperature: Room ambient 68 to 77°F
b. Altitude: Sea level
c. Humidity: 50 percent relative, maximum
d. Atmospheric pressure: 14.7 psia
4.4 Quality conformance inspection.
4.4.1 Lot.
4.4.1.1 Submission of product. Unless otherwise specified by the contracting activity, formation,
and identification of lots shall be in accordance with ANSI/ASQ Z1.4.
4.4.1.2 Size of lot. For the purpose of identification and shipment, the shipping lots of metal parts
assemblies shall consist of 600 assemblies, maximum, unless otherwise specified by contract.
4.4.2 Examination. One hundred percent examination shall be performed for all critical defects.
Examination for major and minor defects shall be performed in accordance with the classification of
defects. Four power (4x) magnification may be used for inspection of such defects as burr and foreign
matter. When compliance with the applicable requirement is in doubt as a result of visual examination, the
characteristic shall be measured or gaged to determine acceptability. All nonconforming material shall be
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business