01 March 2011
20 May 1990
CARTRIDGE IMPULSE, M73 ASSEMBLY
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all departments
and agencies of the Department of Defense.
1.1 Scope. This specification covers the requirements for the M73 Impulse Cartridge (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3, 4, or 5 of this specification, whether or not they are listed..
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-2550 Ammunition, General Specification for
MIL-A-8625 Anodic Coatings for Aluminum and Aluminum Alloys
Comments, suggestions, or questions on this document should be addressed to DEPARTMENT OF THE NAVY, Indian Head
Division, NSWC, E12AP, Document Control, 4123 Artisans Court, Suite 103, Indian Head, MD 20640-5085 OFFICIAL
BUSINESS, or emailed to email@example.com. Since contact information can change, you may want to verify the currency
of this information using the ASSIST Online database at https://assist.daps.dla.mil.
Distribution Statement A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business