MIL-I-60518 Initiator, Cartridge Actuated, M28 Metal Parts AssemblyThis specification covers the requirements for the M28 Cartridge Actuated Initiator Metal Parts Assembly.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14

MIL-I-60518A

204 Cut, damaged, or improperly sealed bag Visual

4.5.2.9 Box, Packing, Ammunition, Drawing 8830993.

Critical None defined
Major None defined
Minor 201	Contents loose	Visual/Manual
202	Strapping missing, loose, broken, or improperly assembled	Visual/Manual
203	Contents of box exposed	Visual
204	Box damaged	Visual
205	Marking missing, incorrect, or illegible	Visual
206	Number of units incorrect	Visual

4.5.2.10 Box, Fiberboard (Outer), Alternative, Packing, Ammunition, Drawing 9216932.

Critical None defined
Major None defined
Minor 201	Contents loose	Manual/Visual
202	Carton broken or damaged	Visual
203	Number of units contained incorrect	Visual
204	Marking missing, incorrect, or illegible	Visual
205	Tape incomplete	Visual

4.5.3 Inspection testing. The following tests shall be performed in accordance with 4.6.

4.5.3.1 Hardness. Fifty units from each heat treated lot of components shall be tested for compliance with the requirements on the applicable drawing. Failure of any unit to comply with the drawing requirements shall be cause for rejection of the lot of components.

4.5.3.2 Hydrostatic pressure. Each chamber and cap shall be subjected to the hydrostatic pressure test. Failure of any cap or chamber subassembly to comply with 3.4 shall be cause for rejection of the subassembly.

4.5.3.3 Shear pin strength. Fifty pins from each lot of shear pins shall be tested for shear strength.

Failure of any shear pin to comply with 3.5 shall be cause for rejection of the lot.