MIL-DTL-48568D(OS)
4.4.6.8 Magnetic particle inspection. Each motor tube, booster tube, and launcher tube shall be 100 percent
magnetic particle inspected in accordance with ASTM E 1444. Discontinuities exceeding one-half the
maximum size permitted by MIL-STD-1907, Grade A, Table I, are unacceptable.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When actual packaging of materiel is to be performed by DOD personnel, these personnel
need to contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activity within the Military
Department or Defense Agency, or within the Military Department's System Command. Packaging data
retrieval is available from the managing Military Department's or Defense Agency's automated packaging
files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful but is not
mandatory).
6.1 Intended use. The CKU-7/A Aircraft Ejection Seat Catapult Assembly is intended to be used to propel
an aircraft ejection seat and its occupant safely out and away from a jet aircraft.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number and date of this specification.
b.
Issue of DODISS to be cited in the solicitation and, if required, the specific issue of
individual documents referenced (see 2.1.1, 2.1.2, and 2.2).
c.
Whether a first article sample is required (see 3.1, 4.3 and 6.4).
d.
Instructions for adaption of first article samples for pressure transducers (see 4.3 and 6.7).
e.
Assigned activity for first article inspection and static firing tests (see 4.3, 4.3.2, 4.4.2.3,
4.4.5, and 6.8).
f.
Whether the gun fire vibration test is required (see 4.3.1.2).
g.
Whether test reports are required (see 4.4.1, 4.4.5.2, and 4.4.6).
h.
When radiographs are to be furnished to the Government (see 4.4.6.1).
i.
Packaging requirements (see 5.1).
j.
Disposition of hardware, scrap propellant, and metal parts (see 6.9).
k.
Inspection conditions, if other than as specified (see 4.2).
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business