MIL-DTL-22244F (OS)
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the Standardization
Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia PA 19111- 5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues are those cited in the solicitation or contract.
DRAWINGS
Naval Air Systems Command (Code Ident 30003)
DL491837
Cartridge, Impulse, Mark 23 Mod 0
1861735
Unloaded Shell Assembly
PUBLICATIONS
Naval Sea Systems Command (Code Ident 53711)
OP 5
Ammunition and Explosives Ashore
(Application for copies should be addressed to the Commanding Officer, Naval Publications and Forms
Center, Attn: 1053, 5801 Tabor Avenue, Philadelphia, PA 19120-5099.)
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of the documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM E 545
Image Quality in Direct Thermal Neutron Radiographic Examination
(Copies of this document are available online at https://www.astm.org/ or from the American Society for
Testing and Materials Customer Service, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.3.
3.2 Conformance to documents. The Mark 23 Mod 0 Impulse Cartridge covered by this specification
shall be manufactured in accordance with DL491837.
3.3 Materials. All materials used in the manufacture of the cartridges shall conform strictly to the
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business