21 September 1992
11 August 1969
THRUSTER, CARTRIDGE ACTUATED, M3A3 METAL PARTS ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.1 Scope. This specification covers the requirements for the M3A3 Cartridge Actuated Thruster Metal
Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplements thereto, cited in the solicitation (see 6.2).
MIL-A-2550 Ammunition, General Specification For
MIL-STD-105 Sampling Procedures And Tables For Inspection By Attributes
MIL-STD-109 Quality Assurance Terms And Definitions
MIL-STD-413 Visual Inspection Guide for Elastomeric O-rings
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center, Standardization Branch (Code 3730), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by sending a letter.
AMSC N/A FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
(Unless otherwise indicated, copies of federal and military specifications and standards are available from
Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business