13 September 2000
24 October 1994
MILITARY ASSOCIATED DETAIL SPECIFICATION
AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS)
ROCKET MOTOR ASSEMBLY, MK 113 MODS
This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for
use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the Mk 113 Mods Rocket
Motor Assembly described herein shall consist of this specification and the latest issue of MIL-DTL-85097.
1.1 Scope. This specification covers the requirements unique to the Rocket Motor Assembly
Mk 113 Mods (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS)
and supplement thereto, cited in the solicitation (see 6.2).
DEPARTMENT OF DEFENSE
USN/USMC Propellant Actuated Devices (Pads), General Specification For
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center,
Standardization Team (Code 840M), Indian Head, MD 20640-5035, by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by sending a letter.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business