3 March 2005
16 April 1990
CARTRIDGE, DELAY, M90 ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.1 Scope. This specification covers the requirements for the M90 Delay Cartridge (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, 4 or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks . The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Ammunition, General Specification for
Coating, Anodic, Conventional for Aluminum and Aluminum Alloy
DEPARTMENT OF DEFENSE STANDARDS
Environmental Test Methods and Engineering Guidelines
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division, Naval
Surface Warfare Center, Technical Information Branch (Code 4230), 101 Strauss Avenue, Indian Head, Maryland 20640-
5035, or emailed to firstname.lastname@example.org. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil/
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business