25 March 2011
14 September 2004
INITIATOR, CARTRIDGE ACTUATED, M27 METAL PARTS ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Scope. This specification covers the requirements for the M27 Cartridge Actuated Initiator Metal
Parts Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Ammunition, General Specification for
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Comments, suggestions, or questions on this document should be addressed to DEPARTMENT OF THE NAVY, Indian Head
Division, NSWC, Code E12AP, Document Control, 4123 Artisans Court, Suite 103, Indian Head, Maryland 20640-5085,
OFFICIAL BUSINESS, or emailed to email@example.com. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business