MIL-DTL-60292B
3.8 Workmanship. Initiators shall be free of cracks, splits, incomplete or damaged threads on inlet and
outlet ends, or other defects which might prevent proper mating with connecting parts or proper
functioning of the device.
3.8.1 Metal defects. All components shall be free from cracks, splits, cold shuts, inclusions, porosity, or
any similar defect.
3.8.2 Burr. No part shall have a burr which might interfere with the assembly or function of the item or
which might be injurious to personnel handling the item.
3.8.3 Foreign matter. No part or assembly shall contain chips, dirt, grease, rust, corrosion, or other
foreign matter.
3.9 Radiographic examination. Each initiator assembly shall be radiographically examined for defects as
specified in 4.4.
3.10 Component parts. All component parts shall meet the requirements of MIL-I-60525 or MIL-I-82767
prior to assembly.
4. VERIFICATION
4.1 Quality assurance terms and definitions. Reference shall be made to ASQ A8402 to define the quality
assurance terms used.
4.1.1 Inspection. Inspection shall be in accordance with MIL-A-2550.
4.2 Inspection provisions.
4.2.1 Lot.
4.2.1.1 Submission of product. Unless otherwise specified by the contracting officer, formation of lots
and presentation of lots shall be in accordance with the "Submission of Product" provisions of ASQ Z1.4.
4.2.1.2 Size of lot. A lot shall consist of an identifiable group of assembled initiators containing metal
parts assemblies produced by a homogeneous process and loaded with one lot of accepted cartridges.
4.2.2 Examination. One-hundred percent examination shall be performed for all critical defects.
Examination for major and minor defects shall be performed in accordance with the classification of
defects. Four power (4X) magnification may be used for inspection of such defects as burr and foreign
matter. When compliance with the applicable requirement is in doubt as a result of visual examination,
the characteristic shall be measured or gaged to determine acceptability. All nonconforming material shall
be rejected.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business