18 October 2005
23 December 1970
INITIATOR, PROPELLANT ACTUATED, JAU-2/A25
METAL PARTS ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.1 Scope. This specification covers Initiator, Propellant Actuated, JAU-2/A25, Metal Parts Assembly.
The assembly will ultimately be loaded and used in conjunction with other propellant actuated devices in
aircrew emergency escape systems.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, 4 or 5 of this specification, whether or not they are listed.
2.2 Government Document.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Ammunition and Special Weapons, General Specification for
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division, Naval
Surface Warfare Center, Technical Information Products Branch (Code E143), 101 Strauss Avenue, Indian Head, Maryland
20640-5035, or emailed to email@example.com. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business