05 October 2005
23 April 1991
DELAY ELEMENT, CARTRIDGE, M75 ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
This specification remains inactive for new design. It may still be used for replacement purposes.
1.1 Scope. This specification covers the requirements for the M75 Cartridge Delay Element (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Ammunition, General Specification for
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division,
Naval Surface Warfare Center, Technical Information Branch (Code 4230), 101 Strauss Avenue, Indian Head,
Maryland 20640-5035, or emailed to firstname.lastname@example.org. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business