16 November 2006
08 September 2003
CUTTER, DELAY, PROPELLANT ACTUATED, M21 (2 SEC) AND M22 (10 SEC)
This specification is approved for use within the Naval Sea Systems Command, Department of the Navy,
and is available for use by all Departments and Agencies of the Department of Defense.
1.1 Scope. This specification covers the requirements for the M21 (2 SEC) and M22 (10 SEC)
Propellant Actuated Cutter (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications, standards, and handbooks form a part
of this document to the extent specified herein. Unless otherwise specified, the issues of these documents
are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
Webbing, Textile, Nylon, Tubular
Composition, Delay Z-1
Powder, Ignition, Gasless, A-1A
Comments, suggestions, or questions on this document should be addressed to Commander, Indian Head Division, Naval
Surface Warfare Center, Technical Information Products Branch (E143), 101 Strauss Avenue, Indian Head, MD 20640 5035, or
emailed to firstname.lastname@example.org. Since contact information can change, you may want to verify the currency of this
information using the ASSIST Online database at https://assist.daps.dla.mil.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business